海水对PMI泡沫夹芯复合材料吸湿性能以及力学性能的影响

玻璃钢/复合材料 ›› 2019, Vol. 0 ›› Issue (9): 105-109.

海水对PMI泡沫夹芯复合材料吸湿性能以及力学性能的影响

郑国栋¹, 徐晓明¹, 雷娟娟¹, 张晶²

1.航天长征睿特科技有限公司,天津300000;
2.航天材料及工艺研究所,北京100076

收稿日期:2018-12-03 出版日期:2019-09-28 发布日期:2019-09-28
作者简介:郑国栋(1987-),男,硕士研究生,主要从事大型复合材料结构件成型和质量改善方面的研究,zhengguodong1987@163.com。

EFFECT OF SEAWATER ON HYGROSCOPICITY AND MECHANICAL PROPERTIES OF PMI FOAM SANDWICH COMPOSITES

ZHENG Guo-dong¹, XU Xiao-ming¹, LEI Juan-juan¹, ZHANG Jing²

1.Aerospace Long March Arimt Science and Technology Co., Ltd., Tianjin 300000, China;
2.Aerospace Research Institute of Materials and Processing Technology, Beijing 100076, China

Received:2018-12-03 Online:2019-09-28 Published:2019-09-28

摘要/Abstract

摘要： 随着泡沫夹芯复合材料在船舶领域的应用越来越广泛,海洋环境对泡沫夹芯复合材料性能的影响有待探究。本文通过对比去离子水和海水对PMI泡沫夹芯复合材料吸湿性能和力学性能的差异,探究海水对泡沫夹芯复合材料影响的机理。实验结果表明:PMI泡沫夹芯复合材料浸泡在海水中饱和吸湿率为5.4%,达到饱和所需时间为28 d;而浸泡在去离子水中的样品的饱和吸水率以及达到饱和所需时间分别为6.9%、30 d;通过Fick第二扩散定律发现海水中的水分子的扩散系数要低于去离子水中水分子的扩散系数。此外,浸泡在去离子水中样品的平压强度、侧压强度和弯曲强度分别降低了37.78%、16.72%、23.71%;而浸泡在海水中样品的性能分别下降了35.56%、21.2%、20.63%。

关键词: PMI泡沫, 夹芯复合材料, 海水, 压缩性能, 弯曲强度

Abstract: With the increasing use of foam sandwich composites in the marine industry, the impact of the marine environment on the performance of foam sandwich composites remains to be explored. In this paper, the mechanism of the influence of seawater on foam sandwich composites was investigated by comparing the difference in hygroscopicity and mechanical properties of PMI foam sandwich composites with deionized water and seawater. The test results show that the saturated moisture absorption rate of PMI foam sandwich composites immersed in seawater is 5.4%, and the time required for saturation is 28 days. The saturated water absorption rate and the time required for saturation of samples immersed in deionized water are 6.9% and 30 days, respectively. Through Fick′s second law of diffusion, the diffusion coefficient of water molecules in seawater is lower than that of water molecules in deionized water. In addition, the flat compressive strength, lateral compressive strength and flexural strength of the samples immersed in deionized water are decreased by 37.78%, 16.72%, and 23.71%, respectively, while the samples immersed in seawater are decreased by 35.56%, 21.2%, and 20.63%, respectively.

Key words: PMI foam, sandwich structure, seawater, compression property, flexural strength

中图分类号:

TB332

郑国栋, 徐晓明, 雷娟娟, 张晶. 海水对PMI泡沫夹芯复合材料吸湿性能以及力学性能的影响[J]. 玻璃钢/复合材料, 2019, 0(9): 105-109.

ZHENG Guo-dong, XU Xiao-ming, LEI Juan-juan, ZHANG Jing. EFFECT OF SEAWATER ON HYGROSCOPICITY AND MECHANICAL PROPERTIES OF PMI FOAM SANDWICH COMPOSITES[J]. Fiber Reinforced Plastics/Composites, 2019, 0(9): 105-109.

参考文献

[1] 孔令滨, 张火明, 方贵盛, 等. 带有大开口的船用玻璃钢夹层板结构力学性能分析[J]. 玻璃钢/复合材料, 2017(6): 5-11.
[2] 伏耀华. 基于钢-泡沫夹层结构的油船与冰碰撞性能分析[J]. 船舶工程, 2014(S1): 158-161.
[3] Cao J, Grenestedt J L. Design and testing of joints for composite sandwich/steel hybrid ship hulls[J]. Composites Part A Applied Science & Manufacturing, 2004, 35(9): 1091-1105.
[4] Zhao Y, Zhou W X, Liu W B, et al. Strength calculation of foam core sandwich composite ship by FEM[J]. Materials Science Forum, 2015, 813: 102-108.
[5] Czabaj M W, Zehnder A T, Davidson B D, et al. Compressive strength of honeycomb-stiffened graphite/epoxy sandwich panels with barely-visible indentation damage[J]. Journal of Composite Materials, 2016, 48(20): 2455-2471.
[6] Hamouda T, Hassanin A H, Kilic A, et al. Hybrid composites from coir fibers reinforced with woven glass fabrics: Physical and mechan-ical evaluation[J]. Polymer Composites, 2017, 38(10): 2212-2220.
[7] Hoto R, Furundarena G, Torres J P, et al. Flexural behavior and water absorption of asymmetrical sandwich composites from natural fibers and cork agglomerate core[J]. Materials Letters, 2014, 127(127): 48-52.
[8] Ilinzeer S, Rupp P, Weidenmann K A. Influence of corrosion on the mechanical properties of hybrid sandwich structures with CFRP face sheets and aluminum foam core[J]. Composite Structures, 2018, 202(15): 142-150.
[9] Joliff Y, Rekik W, Belec L, et al. Study of the moisture/stress effects on glass fibre/epoxy composite and the impact of the interphase area[J]. Composite Structures, 2014, 108(1): 876-885.
[10] Manteghi S, Mahboob Z, Fawaz Z, et al. Investigation of the mechanical properties and failure modes of hybrid natural fiber composites for potential bone fracture fixation plates[J]. Journal of the mechanical behavior of biomedical materials, 2017, 65: 306-316.
[11] 尹亮, 郑国栋, 丁常方, 等. PMI泡沫夹芯复合材料湿热老化性能研究[J]. 玻璃钢/复合材料, 2015(8): 5-9.
[12] Ding A, Wang J, Ni A, et al. Ageing of sandwich composites with E-glass fibre/vinylester skins and PVC foam core in synergistic environmental agents[J]. Composite Structures, 2018, 202(15) 253-260.
[13] 胡建平, 蔡吉喆, 肇研, 等. 湿热环境对蜂窝夹层复合材料性能的影响[J]. 材料工程, 2010(11): 43-47.
[14] 霍瑞丽, 刘伟庆, 王璐, 等. 环境温湿度对泡沫复合材料夹层结构界面性能的影响[J]. 南京工业大学学报(自科版), 2017, 39(5): 39-43.
[15] Ishai O, Hiel C, Luft M. Long-term hygrothermal effects on damage tolerance of hybrid composite sandwich panels[J]. Composites, 1995, 26(1): 47-55.