玻璃钢/复合材料 ›› 2020, Vol. 0 ›› Issue (1): 67-71.

• 应用研究 • 上一篇    下一篇

基于积木式的飞艇桁架式复合材料龙骨结构验证方法

李元章, 鲁国富, 任三元, 肖鹏   

  1. 中国特种飞行器研究所,荆门 448035
  • 收稿日期:2019-03-12 出版日期:2020-01-28 发布日期:2020-01-28
  • 作者简介:李元章(1987-)男,工程师,主要从事飞行器结构强度与试验方面的研究,liyz336@163.com。
  • 基金资助:
    工信部民机科研项目(MJ-2016-F-09)

VERIFICATION METHOD FOR COMPOSITE KEEL STRUCTURE OF AIRSHIP TRUSS BASED ON BUILDING BLOCKS

LI Yuan-zhang, LU Guo-fu, REN San-yuan, XIAO Peng   

  1. China Special Vehicle Research Institute, Jingmen 448035, China
  • Received:2019-03-12 Online:2020-01-28 Published:2020-01-28

摘要: 根据复合材料结构积木式验证方法,结合飞艇桁架式龙骨的结构特点,提出了飞艇桁架式复合材料龙骨的验证思路和结构设计与强度验证的步骤。以某飞艇的桁架式复合材料龙骨结构强度的验证为例,对上述方法进行了从元件级到部件级的试验验证、数值验证及其结果的对比分析。结果表明所建立的桁架式复合材料结构的Nastran有限元分析模型满足工程需要,飞艇桁架式复合材料龙骨可以采用积木式方法进行验证。

关键词: 复合材料, 积木式验证, 飞艇, 桁架, 龙骨

Abstract: In order to obtain the identification method of airship composite keel structure, according to building block approach for composite structure, with the consideration of the structural feature of airship truss keel, the certification way and detailed procedures of structure design and strength verification of the keel of airship truss composite are presented in this paper. By using this method, the structure strength of composite materials truss keel of a certain type of airship is tested and verified from element level to component level to full size keel, and the finite element analysis and its results are compared and analyzed. Some typical tests and analyses are selected and introduced. The results show that the Nastran finite element analysis model of truss composite structure meets the engineering needs. Airship truss composite keel can be verified by building block method.

Key words: composite materials, building block approach, airship, truss, keel

中图分类号: