截面贯入式FRP筋加固混凝土桥面板抗剪性能试验研究

复合材料科学与工程 ›› 2020, Vol. 0 ›› Issue (10): 5-12.

• 基础研究 • 下一篇

截面贯入式FRP筋加固混凝土桥面板抗剪性能试验研究

董鹏程^1,2, 夏立鹏^1*, 王绪纲¹, 郑愚¹

1.东莞理工学院生态环境与建筑工程学院,东莞523808;
2.广东工业大学土木与交通工程学院,广州510090

收稿日期:2020-06-05 出版日期:2020-10-28 发布日期:2020-10-28
通讯作者: 夏立鹏(1991-),男,实验员,硕士,主要从事FRP筋材加固桥面板及相关新型材料与新型结构方面的研究,xialp@dgut.edu.cn。
作者简介:董鹏程(1994-),男,硕士研究生,主要从事混凝土与FRP材料方面的研究。
基金资助:
广东省自然科学基金(2018A030313864);广东省普通高校基础研究与应用基础研究重点项目(2018KZDXM068);广东省科技计划-公益研究与能力建设方向(2016A010103045);东莞市社会科技发展重点项目(20185071401603)

EXPERIMENTAL STUDY ON SHEAR PERFORMANCE OF EMBEDDED THROUGH SECTION SHEAR STRENGTHENING OF CONCRETE BRIDGE SLABS

DONG Peng-cheng^1,2, XIA Li-peng^1*, WANG Xu-gang¹, ZHENG Yu¹

1. School of Environment and Civil Engineering, Dongguan University of Technology, Dongguan 523808, China;
2. School of Civil and Transportation Engineering, Guangdong University of Technology, Guangzhou 510090, China

Received:2020-06-05 Online:2020-10-28 Published:2020-10-28

摘要/Abstract

摘要： 现有桥梁交通量增加、重型卡车靠边跨行驶使得传统混凝土桥面板易发生支座附近区域抗剪破坏,而现有加固方式多针对构件抗弯加固而忽视抗剪问题。本文根据实际桥面板受力状况,采用截面贯入式加固(Embedded Through Section,简称“ETS”)方法并结合纤维增强复合材料(Fiber Reinforced Polymer,简称“FRP”)筋对桥面板进行抗剪加固,对比加固筋的筋材类型、筋材直径以及钻孔损伤的影响。通过分析试件承载力、裂缝分布、破坏模式发现:该加固方法能有效提高桥面板板带抗剪承载力,构件破坏模式从脆性的剪切破坏转变为延性的弯曲破坏或弯剪复合破坏;钻孔损伤和筋材类型变化对桥面板受力与变形影响较小,并且采用FRP材料更能提高加固后结构的耐久性。最后,针对此加固方法提出了相应的承载力计算公式,计算结果与试件承载力吻合良好。

关键词: 桥面板, 截面贯入式加固, 抗剪性能, FRP

Abstract: The increase in traffic and heavy trucks loads close to supports have caused shear failure of concrete bridge decks. However, the existing strengthening methods commonly focus on the improvement of bending capacity of concrete bridge decks while ignoring the situation of shear failure problems. This paper reveals a comprehensive study of the behaviour of concrete slabs shear strengthened with Embedded Through Section (ETS) technique with fibre reinforced polymer (FRP) bars. Several structural variables like material type, diameter, and drilling damage were varied to assess the effectiveness of this shear strengthening technique. By analyzing the bearing capacity, crack distribution and failure mode of the test specimen, the results show that the strengthening method can effectively improve the shear capacity of concrete bridge slabs, and the failure mode changes from brittle shear failure to ductile bending failure or bending-shear composite failure. The drilling holes and different type of strengthening bars have little effect on the capacity and deformation of the bridge decks. Additionally, the use of FRP material can improve the durability of the bridge decks. Finally, a two-way theoretical model was proposed to predict the loading-carrying capacity of concrete slabs strengthened with ETS FRP bars. The ultimate strength predicted by this theoretical method shows good agreement with the test results.

Key words: bridge deck slab, embedded through section, shear performance, FRP

中图分类号:

TB332

董鹏程, 夏立鹏, 王绪纲, 郑愚. 截面贯入式FRP筋加固混凝土桥面板抗剪性能试验研究[J]. 复合材料科学与工程, 2020, 0(10): 5-12.

DONG Peng-cheng, XIA Li-peng, WANG Xu-gang, ZHENG Yu. EXPERIMENTAL STUDY ON SHEAR PERFORMANCE OF EMBEDDED THROUGH SECTION SHEAR STRENGTHENING OF CONCRETE BRIDGE SLABS[J]. Composites Science and Engineering, 2020, 0(10): 5-12.

参考文献

[1] 韦荣强. 桥梁加固技术探析[J]. 科技信息, 2011, 17: 316-317.
[2] 吴金翔. 桥梁加固技术研究[J]. 山西建筑, 2010, 36(4): 328-329.
[3] RODRIGUES R V. Shear strength of reinforced concrete bridge deck slabs[J]. Shear Strength of Reinforced Concrete Bridge Deck Slabs,
2007.
[4] Teng J G, CHEN J F, SMITH S T, et al. Behaviour and strength of FRP-strengthened RC structures: A state-of-the-art review[J]. Proc. ICE-Struct. Build., 2003, 156: 51-62.
[5] LORENZIS D L, TENG J G. Near-surface mounted FRP reinforce-ment: An emerging technique for strengthening structures[J]. Compos. Part B Eng., 2007, 38: 119-143.
[6] 吴丽丽, 于大川. FRP材料在结构加固中的应用研究及展望[J]. 建筑学报, 2014, 45(12): 1099-1101.
[7] 邢丽丽, 孔祥清, 韩飞, 等. AFRP加固钢筋混凝土受损梁抗剪性能试验研究[J]. 玻璃钢/复合材料, 2019(10): 76-82.
[8] 侯喜冬. FRP 复合材料在桥梁加固中的应用研究[J]. 公路交通科技报, 2007(2): 139-140, 147.
[9] 王作虎, 杜修力, 詹界东, 等. FRP筋混凝土梁抗剪性能的研究进展[J]. 玻璃钢/复合材料, 2010(1): 82-85.
[10] 周朝阳, 谭磊, 程小念. FRP抗剪加固钢筋混凝土梁研究综述[J]. 建筑科学与工程学报, 2011, 28(2): 1-7.
[11] DARBY A P, IBELL T J, VALERIO P. Deep embedment of FRP for concrete shear strengthening[J]. Proceedings of the Institution of Civil Engineers Structures & Buildings, 2009, 162(5): 311-321.
[12] CHAALLAL O, MOFIDI A, BENMOKRANE B, et al. Embedded through-section FRP rod method for shear strengthening of RC beams: Performance and comparison with existing techniques[J]. Journal of Composites for Construction, 2010, 794(3): 374-383.
[13] Building code requirements for structural concrete and commentary: ACI Committee 318[S]. Detroit, Michigan: American Concrete Institute, 2006.
[14] 中华人民共和国国家标准. 混凝土结构设计规范: GB 50010—2010[S]. 北京: 中国建筑工业出版社, 2010.
[15] BSI. British standard for the design of steel, concrete and composite bridges: Part 4: BS 5400[S]. London, UK: BSI, 1990.
[16] MOFIDI A, CHAALLAL O, BENMOKRANE B, et al. Experimental tests and design model for RC beams strengthened in shear using the embedded through-section FRP Method[J]. Compos. Constr., ASCE, 2012, 16: 540-550.
[17] COSENZA E, MANFREDI G, REALFONZO R. Behavior and modeling of bond of FRP rebars to concrete[J]. Journal of Composites for Construction, 1997, 1(2): 40-51.

截面贯入式FRP筋加固混凝土桥面板抗剪性能试验研究

EXPERIMENTAL STUDY ON SHEAR PERFORMANCE OF EMBEDDED THROUGH SECTION SHEAR STRENGTHENING OF CONCRETE BRIDGE SLABS

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	宫唯康, 刘晓阳, 荆玉才, 项俊宁, 李相国, 杨国涛. 预应力CFRP板加固钢-混凝土组合梁受弯性能的有限元分析[J]. 复合材料科学与工程, 2022, 0(7): 11-19.
[2]	刘畅, 杨树桐, 杨松, 冯耀东, 徐铭崎. 基于树脂预浸技术的短切Kevlar纤维增强CFRP-混凝土界面力学性能研究[J]. 复合材料科学与工程, 2022, 0(5): 52-60.
[3]	郭峰, 王哲峰, 王共冬, 冯璐, 李桦, 马佳赫, 刘喜亮. 低温条件下含孔碳纤维复合材料层合板拉伸损伤特性研究[J]. 复合材料科学与工程, 2022, 0(4): 56-61.
[4]	于雯, 黄悦, 黄谦, 刘晓阳, 冯伟, 郭瑞鹏. FRP筋预应力混凝土梁长期性能研究进展[J]. 复合材料科学与工程, 2022, 0(4): 111-119.
[5]	周满清, 张智梅, 魏久燚. 钢筋与FRP筋混合配筋混凝土梁最大裂缝宽度计算[J]. 复合材料科学与工程, 2022, 0(3): 73-80.
[6]	陈泰谷, 胡守旺, 罗远彬, 郑愚, 李明. 基于试验数据库的FRP筋增强混凝土梁抗剪承载力可靠度分析[J]. 复合材料科学与工程, 2022, 0(2): 5-10.
[7]	陈国雄, 安茹, 符师桦. FRP筋混凝土梁拉伸刚化效应模型研究[J]. 复合材料科学与工程, 2022, 0(2): 11-18.
[8]	周满清, 张智梅, 程雯. 外贴CFRP加固RC连续梁的弯矩重分布性能研究[J]. 复合材料科学与工程, 2022, 0(2): 31-37.
[9]	崔峻强, 薛昕. 无腹筋FRP筋梁抗剪承载力定量回归分析[J]. 复合材料科学与工程, 2022, 0(2): 38-44.
[10]	井德胜, 白晓宇, 王海刚, 张明义, 李翠翠, 焦玉进, 闫君, 王忠胜. 玻璃纤维增强聚合物锚杆蠕变性能研究进展[J]. 复合材料科学与工程, 2022, 0(2): 119-128.
[11]	邓朗妮, 雷丽贞, 谢宏, 周峥, 廖羚. 疲劳荷载作用下CFRP板底层嵌贴加固RC梁开裂后挠度计算方法[J]. 复合材料科学与工程, 2022, 0(1): 62-67.
[12]	胡静, 吴天航, 巩翰林, 李志宝, 李小二, 司晓亮. 雷击后飞机复合材料燃油箱蒙皮电热损伤特性研究[J]. 复合材料科学与工程, 2021, 0(9): 68-73.
[13]	詹瑒, 李奔奔, 崔璟, 杨亚强. 工字形截面FRP杆件局部屈曲临界力计算方法分析[J]. 复合材料科学与工程, 2021, 0(8): 5-10.
[14]	郭晓云, 陈杰, 唐永明. 不同纤维增强复合材料加固混凝土短柱轴心受压承载力试验研究[J]. 复合材料科学与工程, 2021, 0(8): 66-72.
[15]	钱清锋, 邓安仲, 李飞, 罗盛, 高训鹏, 施霖. GFRP支撑结构扣件节点转动刚度研究[J]. 复合材料科学与工程, 2021, 0(7): 11-16.