T800/607低温复合材料应用评价研究

复合材料科学与工程 ›› 2020, Vol. 0 ›› Issue (2): 97-100.

T800/607低温复合材料应用评价研究

张建宝, 尚呈元, 周宇, 刘永佼

航天材料及工艺研究所,北京100076

收稿日期:2019-05-09 出版日期:2020-02-28 发布日期:2020-02-28
作者简介:张建宝(1982-),男,博士,高级工程师,主要从事复合材料成型自动化方面的研究,zhangjianbao703@163.com。
本文作者还有潘艳。

APPLICATION EVALUATION RESEARCH ON T800/607 CRYOGENIC COMPOSITE MATERIAL

ZHANG Jian-bao, SHANG Cheng-yuan, ZHOU Yu, LIU Yong-jiao

Aerospace Research Institute of Materials & Processing Technology, Beijing 100076, China

Received:2019-05-09 Online:2020-02-28 Published:2020-02-28

摘要/Abstract

摘要： 在阐述国内外低温复合材料贮箱技术研究现状的基础上,从工艺性、力学性能、渗透性等方面对自主研发的T800/607低温复合材料体系进行了性能评价研究,并最终通过圆筒试验件评价试验对T800/607复合材料在液氢无内衬复合材料贮箱中应用的可行性进行了测试评价。

关键词: 复合材料, 低温, 自动铺丝, 工艺, 氦质谱

Abstract: Based on the research situation of the composite cryotank processing technology home and abroad, the properties of T800/607 cryogenic composite were studied through automated fiber placement processing property, mechanical properties and permeability. After that, the application feasibility of T800/607 composite on cryotank without lining was tested and evaluated through cylinder structure member developed and performance tested.

Key words: composite, cryogenic, fiber placement, processing, helium mass spectrometer

中图分类号:

TB332

张建宝, 尚呈元, 周宇, 刘永佼. T800/607低温复合材料应用评价研究[J]. 复合材料科学与工程, 2020, 0(2): 97-100.

ZHANG Jian-bao, SHANG Cheng-yuan, ZHOU Yu, LIU Yong-jiao. APPLICATION EVALUATION RESEARCH ON T800/607 CRYOGENIC COMPOSITE MATERIAL[J]. Composites Science and Engineering, 2020, 0(2): 97-100.

参考文献

[1] 黄诚, 刘德博, 吴会强, 等. 我国航天运载器复合材料贮箱应用展望. 沈阳航空航天大学学报, 2016, 33(2): 27-35.
[2] John V. Composite cryotank project structures for launch vehicles//Composites Australia Conference. 2013.
[3] Robinson M J, Stoltzfus J M, Owens T N. Composite material compatibility with liquid oxygen. USA: AIAA-97-1107.
[4] Robinson M J. Composite cryogenic propellant tank development. USA: AIAA-94-1375-CP.
[5] Robinson M J, Stoltzfus J M, Owens T N. Composite material com-patibility with liquid and gaseous oxygen. USA: AIAA-2001-1215.
[6] Knapschaefer J. NASA/Boeing composite launch vehicle fuel tank scores firsts. Composites World, 2017.
[7] Jackson J R, Vickers J, Fikes J. Composite cryotank technologies and development 2.4 and 5.5m out of autoclave tank test results//Composites and Advanced Materials Expo (CAMX), 26-29 Oct. 2015, United States.
[8] 史汉桥, 唐占文, 孙建波, 等. 低温用碳/环氧复合材料性能. 宇航材料工艺, 2016(4): 25-28.
[9] Gardiner G. SpaceX announces COPV′s role in September rocket explosion. Composites World, 2017.
[10] 黄诚, 雷勇军. 大型运载火箭低温复合材料贮箱设计研究进展. 宇航材料工艺, 2015(2): 1-7.
[11] 刘萝威. 复合材料低温贮箱的开发与应用. 飞航导弹, 2006(3): 59-62.
[12] 张展智, 陈亮, 郑红飞, 等. 基于碳纤维复合材料的低温贮箱支撑杆设计与仿真. 载人航天, 2017(1): 61-64.
[13] 陈振国, 矫维成, 闫美玲, 等. 碳纤维增强树脂基复合材料低温贮箱抗渗漏性研究进展. 玻璃钢/复合材料, 2018(11): 30-35.
[14] 马帅. 低温复合材料贮箱跨尺度层次化分析. 大连: 大连理工大学, 2013.
[15] 张辰威, 张博明. 复合材料贮箱在航天飞行器低温推进系统上的应用与关键技术. 航空学报, 2014, 35(10): 2747-2755.