方形螺旋箍筋GFRP筋混凝土柱轴压性能研究

复合材料科学与工程 ›› 2020, Vol. 0 ›› Issue (8): 5-11.

• 基础研究 • 下一篇

方形螺旋箍筋GFRP筋混凝土柱轴压性能研究

涂建维¹, 付金海^1*, 高奎¹, 谢华²

1.武汉理工大学道路桥梁与结构工程湖北省重点实验室,武汉430070;
2.中建三局建设工程股份有限公司,武汉430064

收稿日期:2019-12-05 出版日期:2020-08-28 发布日期:2020-08-28
通讯作者: 付金海(1994-),男,在读硕士研究生,研究方向为无机纤维筋混凝土结构,765586390@qq.com。
作者简介:涂建维(1975-),男,博士,教授,研究方向为无机纤维筋混凝土结构。
基金资助:
国家自然科学基金资助项目(51478372);国家 “十二五”规划科技支撑项目(2014BAB15B01);湖北省自然科学基金资助项目(2016CFA020)

AXIAL COMPRESSIVE PROPERTIES OF GFRP REINFORCED CONCRETE COLUMNS WITH SQUARE SPIRAL STIRRUPS

TU Jian-wei¹, FU Jin-hai^1*, GAO Kui¹, XIE Hua²

1. Hubei Key Laboratory of Roadway Bridge and Structure Engineering, Wuhan University of Technology, Wuhan 430070, China;
2. China Construction Third Engineering Bureau Co., Ltd., Wuhan 430064, China

Received:2019-12-05 Online:2020-08-28 Published:2020-08-28

摘要/Abstract

摘要： 通过设计5根配置螺旋箍筋和3根配置普通箍筋方形截面玻璃纤维筋(GFRP)混凝土柱(200 mm×200 mm×600 mm)的轴心受压试验,重点分析方形截面GFRP筋混凝土柱的极限承载力和延性等在不同箍筋形式下的变化规律,研究螺旋箍筋对方形截面GFRP筋混凝土柱的轴压性能的影响。试验结果表明:GFRP纵筋承载力占GFRP筋混凝土柱极限承载力的3%~7%;配置螺旋箍筋的GFRP筋混凝土柱的极限承载力比配置普通箍筋的增加了0.8%~1.6%,延性增加了13%~33%;缩小箍筋间距可以防止纵筋过早屈曲破坏,同时可提高GFRP筋混凝土柱的延性和承载力;把GFRP筋受压承载力设置为其极限抗拉强度的0.35倍,可以准确预测GFRP筋混凝土柱的极限承载力。

关键词: GFRP筋, 混凝土柱, 螺旋箍筋, 普通箍筋, 极限承载力, 复合材料

Abstract: Through the axial compression test of five GFRP columns (200 mm×200 mm×600 mm) with spiral stirrups and three GFRP columns (200 mm×200 mm×600 mm) with ordinary stirrups, the change rule of ultimate bearing capacity and ductility of GFRP columns with square sections under different stirrups is analyzed, so as to study the influence of spiral stirrups on the axial compression performance of GFRP columns with square sections. The test results indicate that the load-carrying capacity of longitudinal GFRP bars accounted for 3%~7% of the ultimate load-carrying capacity of the columns. The ultimate load-carrying capacity and ductility of GFRP columns with spiral stirrups increased by 0.8%~1.6% and 13%~33%, respectively, compared to GFRP hoops. Reducing the stirrup spacing may prevent the buckling failure of the longitudinal bars and increase the ductility and load-carrying capacity of the GFRP-RC columns. It has been found that setting the GFRP compressive strength to 35% of the GFRP maximum tensile strength yields a reasonable estimation of ultimate load-carrying capacity of GFRP-RC columns.

Key words: GFRP bars, concrete column, spirals, hoops, ultimate load-carrying capacity, composites

中图分类号:

TB332

涂建维, 付金海, 高奎, 谢华. 方形螺旋箍筋GFRP筋混凝土柱轴压性能研究[J]. 复合材料科学与工程, 2020, 0(8): 5-11.

TU Jian-wei, FU Jin-hai, GAO Kui, XIE Hua. AXIAL COMPRESSIVE PROPERTIES OF GFRP REINFORCED CONCRETE COLUMNS WITH SQUARE SPIRAL STIRRUPS[J]. Composites Science and Engineering, 2020, 0(8): 5-11.

参考文献

[1] American Concrete Institute (ACI). Guide for the design and construction of concrete reinforced with FRP bars: ACI 440.1R-06[S]. Farmington Hills, Michigan: 2006.
[2] American Concrete Institute (ACI). Guide for the design and construction of concrete reinforced with FRP bars: ACI 440.1R-15[S]. Farmington Hills, Michigan: 2015 .
[3] Canadian Standards Association (CSA). Design and construction of building components with fibre-reinforced polymers: CAN/CSA S806-02[S]. Rexdale, ON, Canada: Canadian Standards Association, 2002.
[4] Canadian Standards Association (CSA). Design and construction of building structures with fibre-reinforced polymers: CAN/CSA S806-12[S]. Rexdale, ON, Canada: Canadian Standards Association, 2012.
[5] LUCA A D, MATTA F, NANNI A. Behavior of full scale glass fiber-reinforced polymer reinforced concrete columns under axial load[J]. ACI Structural Journal, 2010, 107(5): 589-596.
[6] AFIFI M Z, MOHAMED H M, BENMOKRANE B. Axial capacity of circular concrete columns reinforced with GFRP bars and spirals[J]. Journal of Composites for Construction, 2014, 18(1): 04013017.
[7] TOBBI H, FARGHALY A S, BENMOKRANE B. Behavior of concentrically loaded fiber-reinforced polymer reinforced concrete columns with varying reinforcement types and ratios[J]. Aci Structural Journal, 2013, 111(2): 375-385.
[8] MOHAMED H M, AFIFI M Z, BENMOKRANE B. Performance evaluation of concrete columns reinforced longitudinally with FRP bars and confined with FRP hoops and spirals under axial load[J]. Journal of Bridge Engineering, 2014, 19(7): 04014020.
[9] MARANAN G B, MANALO A C, BENMOKRANE B, et al. Behavior of concentrically loaded geopolymer-concrete circular columns reinforced longitudinally and transversely with GFRP bars[J]. Engineering Structures, 2016, 117: 422-436.
[10] TOBBI H, FARGHALY A S, BENMOKRANE B. Concrete columns reinforced longitudinally and transversally with glass fiber-reinforced polymer bars[J]. Aci Structural Journal, 2012, 109(4): 551-558.
[11] 混凝土结构设计规范: GB 50010—2010[S]. 北京: 中国建筑工业出版社, 2010.
[12] 贡金鑫, 魏巍巍, 胡家顺. 中美欧混凝土结构设计[M]. 北京: 中国建筑工业出版社, 2007.
[13] MANDER J B, PRIESTLEY M J N, PARK R. Theoretical stress-strain model for confined concrete[J]. Journal of Structural Engineering, 1988, 114(8): 1804-1826.
[14] SHEIKH S A. Analytical model for concrete confinement in tied columns[J]. Journal of the Structural Division, 1982, 108(12): 2703-2722.
[15] PAULTRE P, LÉGERON F. Confinement reinforcement design for reinforced concrete columns[J]. Journal of Structural Engineering, 2008, 134(5): 738-749.
[16] American Concrete Institute (ACI). Building code requirements for structural concrete and commentary: ACI 318-11[S]. Farmington Hills, Michigan: ACI Committee, 2011: 18-11.
[17] WU W P. Thermomechanical properties of Fiber Reinforced Plastic (FRP) bars[D]. Morgantown, WV: West Virginia University, 1992.
[18] DEITZ D H, HARIK I E, GESUND H. Physical properties of glass fiber reinforced polymer rebars in compression[J]. Journal of Composites for Construction, 2003, 7(4): 363-366.

方形螺旋箍筋GFRP筋混凝土柱轴压性能研究

AXIAL COMPRESSIVE PROPERTIES OF GFRP REINFORCED CONCRETE COLUMNS WITH SQUARE SPIRAL STIRRUPS

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	李辉, 赵春江, 梁建国, 曾光, 王蕊, 边强. 变刚度复合材料层合板力学特性及失效机理分析[J]. 复合材料科学与工程, 2022, 0(7): 5-10.
[2]	宫唯康, 刘晓阳, 荆玉才, 项俊宁, 李相国, 杨国涛. 预应力CFRP板加固钢-混凝土组合梁受弯性能的有限元分析[J]. 复合材料科学与工程, 2022, 0(7): 11-19.
[3]	赵雄翔, 孙鹏文, 李建东. 基于应变能的风力机叶片铺层结构优化设计[J]. 复合材料科学与工程, 2022, 0(7): 20-24.
[4]	冯钰茹, 王军利, 张宝军, 刘志远, 李金洋, 张宝升. 复合材料叶片建模及铺层参数对强度的影响分析[J]. 复合材料科学与工程, 2022, 0(7): 25-31.
[5]	常腾飞, 湛利华, 李树健, 潘阳. 不同成型方法的树脂基复合材料帽形结构共固化成型质量研究[J]. 复合材料科学与工程, 2022, 0(7): 32-38.
[6]	黄东辉, 曾少华. 自组装蒙脱土-碳纳米管对玻纤增强复合材料力学及界面性能的影响[J]. 复合材料科学与工程, 2022, 0(7): 39-44.
[7]	满珈诚, 侯进森, 李哲夫, 岳广全, 徐鹏, 姜碧羽, 刘卫平. 连续碳纤维增强热固性预浸料压实性能的试验研究[J]. 复合材料科学与工程, 2022, 0(7): 45-51.
[8]	林梅, 张铁军, 冯宇, 王旗, 武梦科. 湿热/干燥环境交替作用下碳纤维复合材料的吸湿/脱湿特性[J]. 复合材料科学与工程, 2022, 0(7): 52-59.
[9]	高慧, 罗发, 渠永平, 王春海. SiC_f/Al₂O₃/Mullite复合材料的制备及吸波性能[J]. 复合材料科学与工程, 2022, 0(7): 60-65.
[10]	王东萍. 磁性聚吡咯基复合材料吸附电镀废水中铜离子[J]. 复合材料科学与工程, 2022, 0(7): 66-70.
[11]	鲁晓锋, 张颜明, 蒙丹, 苏成功. 全尺寸叶片静力测试中ANSYS梁模型应用与研究[J]. 复合材料科学与工程, 2022, 0(7): 71-74.
[12]	宦胜民, 黄小波, 杨润苗, 向萌. 超支化不饱和聚酯的制备及其应用研究[J]. 复合材料科学与工程, 2022, 0(7): 75-80.
[13]	王雅娜, 赵魏. 复合材料Ⅱ型分层ENF试验数据处理方法对比分析[J]. 复合材料科学与工程, 2022, 0(7): 81-92.
[14]	田会方, 张国武, 吴迎峰, 任政. 水处理罐缠绕工艺中玻璃纤维团打结装置设计与分析[J]. 复合材料科学与工程, 2022, 0(7): 93-98.
[15]	冯倩倩, 朱方龙. 聚合物辅助沉积法制备导电玄武岩纤维[J]. 复合材料科学与工程, 2022, 0(7): 99-102.