风电叶片叶根瓦模具的复合材料固化变形研究

复合材料科学与工程 ›› 2021, Vol. 0 ›› Issue (1): 47-51.

风电叶片叶根瓦模具的复合材料固化变形研究

黄尚洪¹, 陈忠丽², 刘平忠¹, 张雷达²

1.北京玻钢院复合材料有限公司,北京102101;
2.山东大学,济南250061

收稿日期:2020-01-05 出版日期:2021-01-28 发布日期:2021-01-25
作者简介:黄尚洪(1989-),男,硕士,工程师,主要从事复合材料模具工艺方面的研究,huangustb@163.com。

STUDY ON COMPOSITE MATERIAL CURING DEFORMATION OF ROOT TILE MOULD OF WIND POWER BLADE

HUANG Shang-hong¹, CHEN Zhong-li², LIU Ping-zhong¹, ZHANG Lei-da²

1. Beijing Composite Materials Co., Ltd., Beijing 102101, China;
2. Shandong University, Jinan 250061, China

Received:2020-01-05 Online:2021-01-28 Published:2021-01-25

摘要/Abstract

摘要： 建立了风电叶片叶根瓦模具的复合材料热传导-化学模型和粘弹性本构模型,对其固化变形进行了有限元模拟,并通过光纤光栅传感器的监测结果验证了模拟结果的可靠性。结果表明延长高温下的恒温时间可以有效提高树脂的固化反应程度,而改变升温速率和低温下的保温时间对固化度的提高效果不明显;叶根瓦模具的复合材料最大变形位于法兰边缘,导致法兰平整度差,因而减小法兰的变形是控制叶根瓦模具制造精度的关键,建议设计刚性约束来减小变形。

关键词: 风电叶片模具, 复合材料, 固化变形, 有限元模拟

Abstract: The heat transfer-chemical reaction model and viscoelastic constitutive model of root tile mould of wind power blade are established to study the curing deformation of its composite material,and the reliability of the simulation results is verified by the monitoring results of fiber Bragg grating sensors. The research results show that extending the constant temperature time at high temperature can effectively improve the degree of curing reaction of the resin, but the effect of changing the heating rate and the constant time at low temperature on the degree of curing reaction is not obvious. The maximum axial deformation is at the flange edge, the flatness of the flange is not enough, therefore reducing the deformation of the flange is critical to control the manufacturing precision of the root tile mold. And its deformation is mainly determined by the geometry, size and layup sequence of the root tile mold. It is recommended to design rigid constraints to reduce the deformation.

Key words: wind power blade mould, composite material, curing deformation, finite element simulation

中图分类号:

TB332

黄尚洪, 陈忠丽, 刘平忠, 张雷达. 风电叶片叶根瓦模具的复合材料固化变形研究[J]. 复合材料科学与工程, 2021, 0(1): 47-51.

HUANG Shang-hong, CHEN Zhong-li, LIU Ping-zhong, ZHANG Lei-da. STUDY ON COMPOSITE MATERIAL CURING DEFORMATION OF ROOT TILE MOULD OF WIND POWER BLADE[J]. COMPOSITES SCIENCE AND ENGINEERING, 2021, 0(1): 47-51.

参考文献

[1] LIAN J Y, XU Z B, RUAN X D. Analysis and control of cured deformation of fiber-reinforced thermosetting composites: A review[J]. Journal of Zhejiang University-Science A (Applied Physics & Engineering), 2019, 20(5): 311-333.
[2] 乔巍, 姚卫星, 马铭泽. 复合材料残余应力和固化变形数值模拟及本构模型评价[J]. 材料导报, 2019, 33(24): 4193-4198.
[3] 杨青, 卫原平, 刘卫平. 复合材料C/L型结构固化变形的影响因素分析[J]. 航空制造技术, 2019, 62(4): 87-94.
[4] DING A X, LI S X, SUN J X, et al. A thermo-viscoelastic model of process-induced residual stresses in composite structures with considering thermal dependence[J]. Composite Structures, 2016, 136: 34-43.
[5] 王乾, 关志东, 蒋婷, 等. 纤维体积含量和富树脂对复合材料V型结构固化变形的影响[J]. 复合材料学报, 2018, 35(3): 580-590.
[6] LI J, YAO X F, LIU Y H, et al. Thermo-viscoelastic analysis of the integrated T-shaped composite structures[J]. Composites Science and Technology, 2010, 70: 1497-1503.
[7] KIM Y K, WHITE S R. Viscoelastic analysis of processing-induced residual stress in thick composite laminates[J]. Mechanics of Composite Materials and Structures, 1997(4): 361-387.
[8] PARK S H, PARK T S, HAN K G. Real-time monitoring of composite wind turbine bladesusing fiber Bragg grating sensors[J]. Advanced Composite Materials, 2011, 20: 39-51.
[9] 杨文涛, 蔡明, 严永军, 等. 基于电热防冰技术的风电叶片温度场有限元分析[J]. 玻璃钢/复合材料, 2019(2): 63-68.
[10] CHEUNG A, YU Y, POCHIRAJU K. Three-dimensional finite element simulation of curing of polymer composites[J]. Finite Elements in Analysis and Design, 2004, 40(8): 895-912.
[11] ZOBEIRY N, VAZIRI R, POURSARTIP A. Differential implementation of the viscoelastic response of a curing thermoset matrix for composites processing[J]. Journal of Engineering Materials and Technology, 2006, 128: 90-95.
[12] DING A X, LI S X, WANG J H, et al. A three-dimensional thermo-viscoelastic analysis of process-induced stress in composite laminates[J]. Composite Structures, 2015, 129: 60-69.
[13] WANG Q L, GAO L L, WANG X X, et al. Numerical analysis and fiber Bragg grating monitoring of thermocuring processes of carbon fiber/epoxy laminates[J]. Polymer Testing, 2017, 62: 287-294.
[14] KIM Y K, WHITE S R. Process-induced residual stress analysis of AS4/3501-6 composite material[J]. Mechanics of Composite Materials and Structures, 1998(5): 153-186.
[15] KRAVCHENKO O G, KRAVCHENKO S G, PIPES R B. Cure history dependence of residual deformation in a thermosetting laminate[J]. Composites Part A: Applied Science and Manufacturing, 2017, 99: 186-197.
[16] ÇLNAR K, ERSOY N. Effect of fibre wrinkling to the spring-in behaviour of L-shaped composite materials[J]. Composites Part A: Applied Science and Manufacturing, 2015, 69:105-114.