基于核壳纳米纤维的CFRP智能构造设计及自愈合性能研究

doi:10.19936/j.cnki.2096-8000.20221228.015

复合材料科学与工程 ›› 2022, Vol. 0 ›› Issue (12): 108-115.DOI: 10.19936/j.cnki.2096-8000.20221228.015

基于核壳纳米纤维的CFRP智能构造设计及自愈合性能研究

肖红波¹, 毛驰², 王洪伟², 甘雨²

1.武汉交通职业学院智能制造学院,武汉430065;
2.武汉理工大学材料科学与工程学院,武汉430070

收稿日期:2022-08-10 发布日期:2023-02-03
作者简介:肖红波(1979-),女,硕士,副教授,主要从事复合材料智能制造及模具设计和性能方面的研究,306225498@qq.com。
基金资助:
中央高校基本科研业务费专项资金资助(2019Ⅲ070GX)

Intelligent structural design and self-healing performance of CFRP based on core-shell nanofibers

XIAO Hong-bo¹, MAO Chi², WANG Hong-wei², GAN Yu²

1. School of Intelligent Manufacturing, Wuhan Transportation Vocational College, Wuhan 430065, China;
2. School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China

Received:2022-08-10 Published:2023-02-03

摘要/Abstract

摘要： 通过同轴静电纺丝技术,将发泡剂偶氮二甲酸二乙酯(DEAD)和环氧树脂(EP)的混合物封装进聚丙烯腈(PAN)纳米纤维中,制备出超薄核壳纳米纤维毡铺覆在碳纤维织物界面,树脂注入和固化后形成具有超薄自愈合智能夹层的CFRP。利用三点弯曲试验评估了超薄自愈合智能夹层对CFRP层合板损伤失效弯曲强度的自愈合效应。结果表明:PAN核壳纳米纤维及其封装的自愈合剂热性能和CFRP制备成型工艺相匹配;当DEAD含量为5wt%、愈合温度/愈合时间(T/t)为150 ℃/30 min时,CFRP在100%L一次弯曲损伤自愈合效率达到了93.5%,比自愈合剂中无DEAD的提高了12.0%;在加载位移分别为100%L、90%L和80%L的弯曲载荷下,经过三次损伤修复,其自愈合效率依然达到了71.2%、70.2%、84.0%,表明经过多次损伤后,复合材料仍然具备自愈合能力。

关键词: 复合材料, 核壳纳米纤维, 自增压, 自愈合, 多次愈合

Abstract: An ultrathin core-shell nanofiber mats were prepared by encapsulating a mixture of the foaming agent diethyl azodicarboxylate (DEAD) and epoxy resin (EP) into polyacrylonitrile (PAN) nanofibers by coaxial electrostatic spinning technique and laying them on the interface of carbon fiber fabric, and forming CFRP with ultrathin self-healing smart sandwich after resin injection and curing. The self-healing effect of the ultrathin self-healing smart sandwich on the bending strength of CFRP laminates with damage failure was evaluated using a three-point bending test. The results showed that the thermal properties of PAN core-shell nanofibers and its encapsulated self-healing agent matched with the CFRP preparation and molding process. When the DEAD content was 5wt% and the healing temperature/healing time (T/t) was 150 ℃/30 min, the self-healing efficiency of CFRP reached 93.5% at 100%L primary bending damage, which was improved by 12.0% compared with that without DEAD in the self-healing agent. Under the bending load with loading displacement of 100%L, 90%L and 80%L, respectively, the self-healing efficiency still reached 71.2%, 70.2% and 84.0% after three damage repairs, indicating that the composite still has self-healing ability after multiple damages.

Key words: composite materials, core-shell nanofibers, self-pressurization, self-healing, multiple healing

中图分类号:

TB332

肖红波, 毛驰, 王洪伟, 甘雨. 基于核壳纳米纤维的CFRP智能构造设计及自愈合性能研究[J]. 复合材料科学与工程, 2022, 0(12): 108-115.

XIAO Hong-bo, MAO Chi, WANG Hong-wei, GAN Yu. Intelligent structural design and self-healing performance of CFRP based on core-shell nanofibers[J]. COMPOSITES SCIENCE AND ENGINEERING, 2022, 0(12): 108-115.

参考文献

[1] 杨雪勤, 张骁骅. 航空航天用复合材料的无损检测和自修复研究进展[J]. 纺织导报, 2018(S1): 92-98.
[2] 章明秋, 容敏智. 结构用自修复型高分子材料的制备[J]. 高分子学报, 2012(11): 1183-1199.
[3] PATEL A J, SOTTOS N R, WETZEL E D, et al. Autonomic healing of low-velocity impact damage in fiber-reinforced composites[J]. Composites Part A: Applied Science and Manufacturing, 2010, 41(3): 0-368.
[4] SCHELTJENS G, DIAZ M M, BRANCART J, et al. A self-healing polymer network based on reversible covalent bonding[J]. Reactive & Functional Polymers, 2013, 73(2): 413-420.
[5] JONES A R, BLAISZIK B J, WHITES R, et al. Full recovery of fiber/matrix interfacial bond strength using a microencapsuiated solvent-based healing system[J]. Composites ence and Technology, 2013, 79: 1-7.
[6] SCHEINER M, DICKENS T J, OKOLI O. Progress towards self-healing polymers for composite structural applications[J]. Polymer, 2016, 83: 260-282.
[7] 申薛靖, 刘科海, 高东岳, 等. 微胶囊型自愈合聚合物基复合材料研究进展[J]. 复合材料学报, 2018, 35(9): 2303-2320.
[8] 顾海超, 杨涛, 杜宇. 中空纤维型自修复复合材料的修复效率及力学性能[J]. 宇航材料工艺, 2017, 47(4): 75-78.
[9] 倪卓, 林煜豪, 黄苇颖, 等. 环氧树脂微胶囊合成及其反应动力学[J]. 化工学报, 2018, 69(4): 1790-1798.
[10] LEE M W, AN S, LEE C, et al. Self-healing transparent core-shell nanofiber coatings for anti-corrosive protection[J]. Journal of Materials Chemistry A, 2014, 2(19): 7045.
[11] NEISIANY R E, LEE J K Y, KHORASANI S N, et al. Facile strategy toward fabrication of highly responsive self-healing carbon/epoxy composites via incorporation of healing agents encapsulated in poly (methylmethacrylate) nanofiber shell[J]. Journal of Industrial and Engineering Chemistry, 2018, 59: 456-466.
[12] NEISIANY R E, KHORASANI S N, LEE J K Y, et al. Interfacial toughening of carbon/epoxy composite by incorporating styrene acrylonitrile nanofibers[J]. Theoretical and Applied Fracture Mechanics, 2018, 95: 242-247.
[13] MITCHELL T J, KELLER M W. Coaxial electrospun encapsulation of epoxy for use in self-healing materials[J]. Polymer International, 2013, 62(6): 860-866.
[14] SINHA-RAY S, PELOT D D, ZHOU Z P, et al. Encapsulation of self-healing materials by coelectrospinning, emulsion electrospinning, solution blowing and intercalation[J]. Journal of Materials Chemistry. 2012, 22(18): 9138-9146.
[15] NEISIANY R E, LEE J K Y, KHORASANI S N, et al. Towards the development of self-healing carbon/epoxy composites with improved potential provided by efficient encapsulation of healing agents in core-shell nanofibers[J]. Polymer Testing, 2017, 62: 79-87.
[16] WILLIAMS G, TRASK R, BOND I. A self-healing carbon fibre reinforced polymer for aerospace applications[J]. Composites Part A Applied Science & Manufacturing, 2007, 38(6): 1525-1532.
[17] TRASK R S, BOND I P. Biomimetic self-healing of advanced composite structures using hollow glass fibres[J]. Smart Materials and Structures, 2006, 15(3): 704-710.
[18] PANG J W C, BOND I P. A hollow fibre reinforced polymer composite encompassing self-healing and enhanced damage visibility[J]. Composites Science & Technology, 2005, 65(11-12): 1791-1799.
[19] 卢康逸, 张月义, 杨小平, 等. 碳纤维复合材料层间增强增韧技术研究进展[J]. 航空制造技术, 2020, 63(18): 14-23.

基于核壳纳米纤维的CFRP智能构造设计及自愈合性能研究

Intelligent structural design and self-healing performance of CFRP based on core-shell nanofibers

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	王孟, 刘程, 张玉, 贾航, 乔越, 蹇锡高. 成型温度对CF/PPEK复合材料的缺陷和力学性能影响[J]. 复合材料科学与工程, 2024, 0(3): 5-12.
[2]	史洪源, 任文坚, 党杰, 周鹏. 玻璃纤维增强复合材料超声检测声场的CIVA仿真与试验研究[J]. 复合材料科学与工程, 2024, 0(3): 20-24.
[3]	杨思鑫, 曹忠亮, 顾付伟. 双三角点阵夹芯结构低速冲击下的动态响应与失效机制[J]. 复合材料科学与工程, 2024, 0(3): 25-34.
[4]	张斌, 赵晶, 王世杰. Kagome点阵结构参数对其压缩特性的影响及轻质化设计[J]. 复合材料科学与工程, 2024, 0(3): 35-42.
[5]	王宇轩, 曹东风, 胡海晓, 李书欣. 计及层内和层间的L形层合板失效的数值研究[J]. 复合材料科学与工程, 2024, 0(3): 43-53.
[6]	耿健, 董九志, 梅宝龙, 蒋秀明. 三维四向碳/碳复合材料力学性能预测与试验验证[J]. 复合材料科学与工程, 2024, 0(3): 54-60.
[7]	高坤, 张兆恒, 邢亚娟, 左小彪, 王博尧, 赵泽华. 含磷POSS阻燃乙烯基酯树脂性能研究[J]. 复合材料科学与工程, 2024, 0(3): 61-64.
[8]	郑子君, 乔英, 邵家儒. 基于机器视觉的短纤维复合材料的取向度提取方法[J]. 复合材料科学与工程, 2024, 0(3): 65-72.
[9]	许晓婷, 郝恩全, 邵慧奇, 邵光伟, 毕思伊, 陈南梁, 蒋金华. 三维大隔距机织间隔织物柔性复合材料的服役性能研究[J]. 复合材料科学与工程, 2024, 0(3): 73-78.
[10]	苏桐, 胡果馨, 刘振. 全碳纤维复合材料太阳能无人机机翼结构优化设计[J]. 复合材料科学与工程, 2024, 0(3): 79-83.
[11]	伍强, 赵凯, 刘鹏飞, 张涛涛, 朱德勇. Z形纤维增强复合材料层压板固化变形分析[J]. 复合材料科学与工程, 2024, 0(3): 84-90.
[12]	宋贵宾, 黄光启, 杨胜春. 复合材料层压板胶接挖补修理分析方法及影响因素研究[J]. 复合材料科学与工程, 2024, 0(3): 91-96.
[13]	王耀, 邵丹丹, 雷炳育. 共沉淀析出-热压技术制备高储能性能复合材料薄膜[J]. 复合材料科学与工程, 2024, 0(3): 97-102.
[14]	张仲香, 刘宝锋, 方晨鑫, 陈文光, 顾育慧, 李军向. 沙戈荒环境下风电叶片中复合材料耐高温性能研究[J]. 复合材料科学与工程, 2024, 0(3): 103-107.
[15]	邓忠, 支亚非, 程家林, 杨文. 太阳能无人机机翼复合材料主梁铺层优化[J]. 复合材料科学与工程, 2024, 0(3): 108-112.