碳纤维八面体骨架增强泡沫复合结构的制备及力学性能分析

复合材料科学与工程 ›› 2020, Vol. 0 ›› Issue (6): 62-67.

碳纤维八面体骨架增强泡沫复合结构的制备及力学性能分析

徐香新

东北大学理学院,沈阳110819

收稿日期:2019-09-18 出版日期:2020-06-28 发布日期:2020-06-28
作者简介:徐香新(1990-),男,硕士,实验师,主要从事复合材料性能及力学行为方面的研究。
基金资助:
中央高校基本科研业务费资助项目(02060032119012)

PREPARATION AND MECHANICAL PROPERTIES ANALYSIS OF CARBON FIBER SKELETON REINFORCED HYBRID COMPOSITE

XU Xiang-xin

Department of Science, Northeastern University, Shenyang 110819, China

Received:2019-09-18 Online:2020-06-28 Published:2020-06-28

摘要/Abstract

摘要： 设计了一种不需加装面板的碳纤维八面体骨架增强泡沫复合结构,介绍了碳纤维八面体骨架增强泡沫复合结构的制作工艺。分别从实验测试以及理论分析两个方面,获得了碳纤维八面体骨架增强泡沫复合结构的抗压强度及压缩模量等力学性能。研究结果表明:受边界效应影响,碳纤维八面体骨架增强泡沫复合结构的抗压强度及压缩模量明显降低,实测抗压强度介于理论最大值与最小值,压缩模量甚至低于最小值。对比其他类型的碳纤维-泡沫复合结构,碳纤维八面体骨架增强泡沫复合结构在抗压强度与压缩模量上具有一定优势。碳纤维八面体骨架增强泡沫复合结构具有近乎各向同性的力学性能,密度低于水,耐腐蚀性高,在航海领域的应用前景广泛。

关键词: 碳纤维, 人工合成泡沫, 八面体骨架, 复合材料, 力学性能

Abstract: A kind of carbon fiber reinforced foam without panels for the hybrid octet lattice was designed and the fabrication technology of the hybrid octet lattice was introduced. The compressive strength and compressive modulus of carbon fiber skeleton reinforced hybrid composite were obtained from experimental test and theoretical analysis. The results show that the compressive strength and modulus of carbon fiber skeleton reinforced hybrid composite decrease significantly by boundary effect. The measured compressive strength is between the theoretical maximum and minimum, and the compressive modulus is even lower than the minimum. Compared with other types of carbon fiber-foam composite structures, carbon fiber skeleton reinforced hybrid composite have certain advantages in compressive strength and compressive modulus. Carbon fiber skeleton reinforced hybrid composite has the following advantages including nearly isotropic mechanical properties, and lower density than water and corrosion resistance. It has wide application prospects in the field of navigation.

Key words: carbon fiber, syntactic foam, octet lattice, composite material, mechanical properties

中图分类号:

TB332

徐香新. 碳纤维八面体骨架增强泡沫复合结构的制备及力学性能分析[J]. 复合材料科学与工程, 2020, 0(6): 62-67.

XU Xiang-xin. PREPARATION AND MECHANICAL PROPERTIES ANALYSIS OF CARBON FIBER SKELETON REINFORCED HYBRID COMPOSITE[J]. Composites Science and Engineering, 2020, 0(6): 62-67.

参考文献

[1] 赓祥, 蔡殉. 材料科学基础[M]. 上海: 交通大学出版社, 2003.
[2] Deshpande V S, Fleck N A. Collapse of truss core sandwich beams in 3-point bending[J]. International Journal of Solids and Structures, 2001, 38: 6275-6305.
[3] Evans A G, Hutchinson J W, Fleck N A, et al. The topological design of multifunctional cellular metals[J]. Progress in Materials Science, 2001, 46(3): 309-327.
[4] Deshapande V S, Ashby M F, Fleck N A. Form topology bending versus stretching dominated architectures[J]. Acta Materialia, 2001, 49(10): 1035-1040.
[5] 张卫红, 吴琼, 高彤. 周期性金属桁架夹芯板的力学性能研究进展[J]. 昆明理工大学学报: 理工版, 2005, 30(6): 24-28.
[6] 杜善义. 先进复合材料与航空航天[J]. 复合材料学报, 2007, 24(1): 1-12.
[7] 钱海峰, 张振华, 牟金磊, 等. 金字塔点阵夹芯板单元结构准静态压缩性能研究[J]. 中国舰船研究, 2013(5): 46-51.
[8] ASTM. Standard test method for tensile properties of polymer matrix composite materials: ASTM D3039/D3039M-14[S]. West Conshohocken: ASTM International, 2014.
[9] ASTM. Standard test method for flatwise compressive properties of sandwich cores: ASTM C365/C365M-16[S]. West Conshohocken: ASTM International, 2016.
[10] Queheillalt D T, Wadley H N G. Cellular metal lattices with hollow trusses[J]. Acta Materialia, 2005, 53(2): 303-313.
[11] Deshapande V S, Fleck N A, Ashby M F. Effective properties of the octet-truss lattice material[J]. Journal of the Mechanics and Physics of Solids, 2001, 49(8): 1747-1769.
[12] George T, Deshpande V S, Sharp K. Hybrid core carbon fiber composite sandwich panels: fabrication and mechanical response[J]. Composite structures, 2014, 108: 696-710.
[13] 沈观林, 胡更开, 刘彬. 复合材力力学[M]. 北京: 清华大学出版社, 2013.
[14] 肖冰, 康凤, 胡传凯, 等. 国外轻质结构材料在国防工业中的应用[J]. 兵器材料科学与工程, 2011, 34(1): 94-97.
[15] 钦伦洋. 基于拓扑优化的船舶结构轻量化研究[D]. 大连: 大连海事大学, 2016.