玻璃钢/复合材料 ›› 2020, Vol. 0 ›› Issue (1): 92-94.

• 应用研究 • 上一篇    下一篇

玄武岩长丝/芳纶间隔纱织物复合材料板材耐冲击性能的研究

王子帅, 钟智丽, 万佳, 薛兆磊   

  1. 天津工业大学纺织科学与工程学院,天津 300387
  • 收稿日期:2019-04-09 出版日期:2020-01-28 发布日期:2020-01-28
  • 作者简介:王子帅(1995-),男,硕士研究生,主要从事纺织工程方面的研究,wangzishuai898@163.com。

STUDY ON IMPACT RESISTANCE OF BASALT FILAMENT/ARAMID INTERVAL YARN FABRIC COMPOSITE SHEET

WANG Zi-shuai, ZHONG Zhi-li, WAN Jia, XUE Zhao-lei   

  1. School of Textile Science and Engineering, Tiangong University, Tianjin 300387, China
  • Received:2019-04-09 Online:2020-01-28 Published:2020-01-28

摘要: 对四种经纱细度、经纱密度不同的玄武岩长丝/芳纶间隔纱织物复合板材进行相同冲击能量的耐冲击测试,结果表明:经纱细度增加,复合板材破坏程度减小,耐冲击性能较好;而经纱细度等参数相同的预制件,预制件经纱密度增大,玄武岩长丝/芳纶间隔纱织物复合材料板材的耐冲击能力减弱。

关键词: 玄武岩纤维, 芳纶纤维, 间隔纱织物, 复合板材, 耐冲击性能

Abstract: The impact resistance of basalt filament/aramid spacer fabric composite plates with different warp fineness and warp density were tested with the same impact energy. However, for the prefabricated pieces with the same longitude fineness and other parameters, the density of the prefabricated pieces increases, and the impact resistance of the basalt filament/aramid spacer fabric composite plate weakens.

Key words: basalt fiber, aramid fiber, spacer fabric, composite plate, impact resistance

中图分类号: