一种陆基充气天线反射面材料拉伸性能研究

doi:10.19936/j.cnki.2096-8000.20230428.014

复合材料科学与工程 ›› 2023, Vol. 0 ›› Issue (4): 94-99.DOI: 10.19936/j.cnki.2096-8000.20230428.014

一种陆基充气天线反射面材料拉伸性能研究

翟文浩^1,2, 蒋金华^1,2, 郝恩全³, 邵慧奇¹, 陈南梁^1,2, 沈为^1,2*

1.东华大学产业用纺织品教育部工程研究中心,上海201620;
2.东华大学纺织学院,上海201620;
3.浙江明士达股份有限公司,嘉兴314419

收稿日期:2022-03-23 出版日期:2023-04-28 发布日期:2023-08-22
通讯作者: 沈为(1962—),女,硕士,副教授,主要研究方向为针织工艺,shenwei@dhu.edu.cn。
作者简介:翟文浩(1996—),男,硕士研究生,主要从事纺织结构复合材料方面的研究。
基金资助:
上海市科学技术委员会资助上海市自然科学基金(20ZR1401600);中央高校基本科研业务费专项资金项目(2232020G-06)

Study of tensile properties of a land-based inflatable antenna reflective surface material

ZHAI Wenhao^1,2, JIANG Jinhua^1,2, HAO Enquan³, SHAO Huiqi¹, CHEN Nanliang^1,2, SHEN Wei^1,2*

1. Engineering Research Center of Ministry of Education for Technical Textiles, Donghua University, Shanghai 201620, China;
2. College of Textiles, Donghua University, Shanghai 201620, China;
3. Zhejiang Mingshida Co., Ltd., Jiaxing 314419, China

Received:2022-03-23 Online:2023-04-28 Published:2023-08-22

摘要/Abstract

摘要： 提出用一种三维结构的大隔距机织间隔织物增强PVC膜复合材料作为陆基充气天线的反射面材料。为研究反射面材料表层不同方向力学性能的差异,不同拼接材料和不同拼接宽度与拼接处断裂强力的关系以及反射面材料间隔方向拉伸能力的影响因素,对反射面材料进行了单轴拉伸试验。试验结果表明:试样材料表层的拉伸断裂强度为纬向>经向>45°方向;基布在与PVC膜复合后经纬向断裂强力提高2~3倍,45°方向断裂强力提高10倍。拼接宽度和拼接材料的断裂强度与材料拼接处的断裂强度正相关;间隔方向的抗拉伸性能与间隔纱的密度、表层织物组织结构的密度成正比,与间隔高度成反比,其中间隔丝的密度对间隔方向的抗拉伸性能影响程度最大。

关键词: 间隔织物, 柔性复合材料, PVC膜, 拉伸性能, 充气天线反射面

Abstract: A three-dimensional structured woven spacer fabric reinforced PVC film composite is proposed as the reflective surface material for land-based inflatable antennas. In order to study the differences in mechanical properties of the surface layer of the reflective surface material in different directions, the relationship between different splice materials and different splice widths and the fracture strength of the splice, as well as the factors influencing the tensile strength of the reflective surface material in the spacing direction, uniaxial tensile tests were conducted on the reflective surface material. The test results show that the tensile breaking strength of the surface layer of the composite material is latitudinal > meridional >45° direction; the breaking strength of the base fabric is increased by 2~3 times in the meridional direction and 10 times in the 45° direction after the lamination of the PVC film. The fracture strength of the splice width and the splice material are positively correlated with the fracture strength of the material splice; the tensile strength in the spacer direction is proportional to the density of the spacer yarn and the density of the tissue structure of the surface fabric, and inversely proportional to the spacer height, in which the density of the spacer yarn has the greatest influence on the tensile strength in the spacer direction.

Key words: spacer fabric, flexible composite material, PVC membrane, tensile properties, inflatable antenna reflector

中图分类号:

TB332

翟文浩, 蒋金华, 郝恩全, 邵慧奇, 陈南梁, 沈为. 一种陆基充气天线反射面材料拉伸性能研究[J]. 复合材料科学与工程, 2023, 0(4): 94-99.

ZHAI Wenhao, JIANG Jinhua, HAO Enquan, SHAO Huiqi, CHEN Nanliang, SHEN Wei. Study of tensile properties of a land-based inflatable antenna reflective surface material[J]. COMPOSITES SCIENCE AND ENGINEERING, 2023, 0(4): 94-99.

参考文献

[1] WELCH W B. Derivation of surface shape for inflatable large aperture antennas[J]. Mathematical Methods in the Applied Sciences, 2019, 42(18): 49-64.
[2] VELDMAN S L, VERMEEREN C A J R. Inflatable structures in aerospace engineering-An overview[C]//Proceedings of European Conference on Spacecraft Structures, Materials and Mechanical Testing. Noordwijk, The Netherlands: 2000: 93-98.
[3] SHINDE S D, UPADHYAY S H. The novel design concept for the tensioning system of an inflatable planar membrane reflector[J]. Archive of Applied Mechanics, 2021, 91(4): 33-46.
[4] 潘巧灵, 蒋金华, 唐渝思, 等. 球形陆基充气天线球面材料力学性能研究[J]. 玻璃钢/复合材料, 2014(11): 77-81.
[5] 黄河, 关富玲, 唐渝思, 等. 充气球天线材料性能试验与反射面型面分析[J]. 浙江大学学报(工学版), 2015, 49(4): 776-781.
[6] 陶红兵, 郝恩全, 邵慧奇, 等. 基于大隔距材料陆基充气天线反射面精度的影响因素[J]. 复合材料科学与工程, 2022(1): 46-53.
[7] LIU T, WANG X H, QIU X M, et al. Theoretical study on the parameter sensitivity over the mechanical states of inflatable membrane antenna[J]. Aerospace Science and Technology, 2020, 102(1):105843.
[8] CHANDRA A, TONAZZI J C L, STETSON D, et al. Inflatable membrane antennas for small satellites[C]//Aerospace Conference Proceedings. 2020: 26-27.
[9] VERTEGAAL C, LI M J H, BENTUM M, et al. Inflatable coplanar patch antenna array for spaceborne applications[C]//Aerospace Conference Proceedings. 2021: 11-13.
[10] WANG S K, LI M, GU Y Z, et al. Mechanical reinforcement of three-dimensional spacer fabric composites[J]. Materials Science Forum, 2010, 654-656: 2604-2607.
[11] YU S, DONG M, JIANG G, et al. Compressive characteristics of warp-knitted spacer fabrics with multi-layers[J]. Composite Structures, 2021, 256: 113016.
[12] 郭威东, 夏风林. 双针床超大隔距经编间隔织物生产实践[J]. 针织工业, 2019(4): 20-23.
[13] LIU Y, LIN G C. Uniaxial tensile mechanical tests of Kapton foil at high-low temperature conditions[J]. Aircraft Engineering and Aerospace Technology, 2021, 93(6): 1043-1051.
[14] 于伟东, 储才元. 纺织物理[M]. 上海: 东华大学出版社, 2009: 296-298.
[15] 马亚运, 陶楠楠, 高晓平. 双轴向经编和三维正交机织增强复合材料拉伸性能实验研究[J]. 玻璃钢/复合材料, 2016(11): 15-19.

一种陆基充气天线反射面材料拉伸性能研究

Study of tensile properties of a land-based inflatable antenna reflective surface material

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	许晓婷, 郝恩全, 邵慧奇, 邵光伟, 毕思伊, 陈南梁, 蒋金华. 三维大隔距机织间隔织物柔性复合材料的服役性能研究[J]. 复合材料科学与工程, 2024, 0(3): 73-78.
[2]	赵洪飞, 张译文, 王卫东, 邓宗才, 赵洋, 刘青, 刘皓. 耐碱玻璃纤维网格砂浆板拉伸性能的试验研究[J]. 复合材料科学与工程, 2022, 0(2): 99-106.
[3]	罗金标, 彭哲琦, 汪昕, 严宗雪, 林敬辉, 刘浪. 新型玄武岩纤维复合材料(BFRP)锚杆力学性能研究[J]. 复合材料科学与工程, 2022, 0(12): 79-86.
[4]	陶红兵, 郝恩全, 邵慧奇, 沈为, 陈南梁, 蒋金华. 基于大隔距材料陆基充气天线反射面精度的影响因素[J]. 复合材料科学与工程, 2022, 0(1): 46-53.
[5]	宋金鹏, 王金炜, 罗浩, 樊晓斌, 桂林. 碳纤维复合材料圆环拉伸力学性能研究[J]. 复合材料科学与工程, 2021, 0(6): 65-71.
[6]	付金毅, 孙向春. 基于编织结构的针刺复合材料拉伸性能预测[J]. 复合材料科学与工程, 2021, 0(4): 111-118.
[7]	王海雷, 段跃新, 王维维, 蒋金隆. 玻璃纤维与碳纤维混杂复合材料的拉伸及低速冲击性能研究[J]. 复合材料科学与工程, 2021, 0(2): 102-109.
[8]	严斌, 李向前, 尹明鑫, 刘维伟, 陈巍, 马承燕. 低面内性能损伤的Z-pin增韧技术研究[J]. 复合材料科学与工程, 2021, 0(11): 62-68.
[9]	袁超, 邱启艳, 陈静. 制样基体树脂及固化张力对碳纤维复丝拉伸性能的影响[J]. 复合材料科学与工程, 2021, 0(10): 107-110.
[10]	钱若力, 穆晓光, 王轩, 李权舟. 含褶皱缺陷玻璃纤维增强复合材料层合板拉伸渐进失效分析[J]. 复合材料科学与工程, 2020, 0(7): 13-19.
[11]	王华, 王希杰, 王增加. 碳纤维复合管-铝合金胶接接头拉伸性能研究[J]. 复合材料科学与工程, 2020, 0(6): 95-97.
[12]	丁磊, 陈南梁, 王晋熹, 李贝贝. 表面处理对Vectran增强膜材性能的影响[J]. 复合材料科学与工程, 2020, 0(11): 5-11.
[13]	范鎔韬, 关志东, 黄永杰, 苏雨茹. 薄层合板单面贴补修理拉伸性能研究[J]. 玻璃钢/复合材料, 2019, 0(2): 83-90.
[14]	侯佳佳, 陈南梁, 蒋金华, 刘译雯. 涤纶高密双轴向经编增强PVC膜材粘弹性本构关系涤纶高密双轴向经编增强PVC膜材粘弹性本构关系[J]. 玻璃钢/复合材料, 2019, 0(12): 11-17.
[15]	杨龙英. 不同缝合方式对缝合复合材料力学性能的影响研究[J]. 玻璃钢/复合材料, 2018, 0(6): 99-103.