干纤维自动铺放液体成型复合材料技术的研究进展

doi:10.19936/j.cnki.2096-8000.20240328.017

摘要/Abstract

摘要： 干纤维自动铺放液体成型复合材料技术是将自动铺放技术和液态成型技术结合,可同时实现先进复合材料的高韧化、自动化和低成本化,是复合材料扩大应用的重点发展方向之一。首先介绍了干纤维自动铺放液体成型复合材料技术的起源,然后分析了国外成熟的干纤维自动铺放材料的组成、性能和制备方法,归纳总结了国外干纤维自动铺放液体成型复合材料构件验证和应用情况,最后简单介绍了国内干纤维自动铺放液体成型复合材料技术现状,以期推动国内干纤维自动铺放液体成型技术的发展和应用。

关键词: 干纤维铺放, 网膜, 定型剂, 预制体, 渗透率, 复合材料

Abstract: Dry fiber automatic placement liquid forming composite technology is a combination of automatic placement technology and liquid forming technology, which can realize the high toughness, automation and low cost of advanced composite materials at the same time. Meanwhile, it is one of the key development directions of expanded application of composite materials. In this review, the origin of dry fiber automatic placement liquid forming composite technology was briefly introduced. The composition, performance and preparation methods of mature dry fiber automatic placement materials were discussed. Then, the verification and application of dry fiber automatic placement liquid forming composite components were summarized. Finally, the current situation of domestic dry fiber automatic placement liquid forming composite technology was briefly introduced. The development and application of domestic dry fiber automatic placement liquid forming composite technology were proposed.

Key words: dry fiber placement, veil, binder, preform, permeability, composites

中图分类号:

TB332

彭公秋, 白钰, 钟翔屿, 张连旺, 包建文, 曹正华. 干纤维自动铺放液体成型复合材料技术的研究进展[J]. 复合材料科学与工程, 2024, 0(3): 113-120.

PENG Gongqiu, BAI Yu, ZHONG Xiangyu, ZHANG Lianwang, BAO Jianwen, CAO Zhenghua. Research progress of dry fiber automatic placement liquid forming composites[J]. COMPOSITES SCIENCE AND ENGINEERING, 2024, 0(3): 113-120.

参考文献

[1] 杜善义. 先进复合材料与航空航天[J]. 复合材料学报, 2007, 24(1): 1-12.
[2] 彭公秋, 钟翔屿, 石峰晖, 等. 自动铺带和手工铺贴国产 T800 级碳纤维增强复合材料对比研究和等同性评价[J]. 复合材料科学与工程, 2021(11): 69-74.
[3] 陈祥宝. 聚合物基复合材料手册[M]. 北京: 化学工业出版社,2004.
[4] 蒋诗才, 包建文, 张连旺, 等. 液体成型树脂基复合材料及其工艺研究进展[J]. 航空制造技术, 2021(5): 70-81, 102.
[5] DIRK H J A L, WARD C, POTTER K D. The engineering aspects of automated prepreg layup: History, present and future[J]. Composites Part B: Engineering, 2012, 43(3) : 997-1009.
[6] 邢丽英, 包建文, 礼嵩明, 等. 先进树脂基复合材料发展现状和面临的挑战[J]. 复合材料学报, 2016, 33(7): 1327-1338.
[7] 益小苏. 复合材料结构整体化技术研究进展[J]. 航空科学技术, 2011(2): 4-8.
[8] LUKASZEWICZ D H J A, POTTER K. Through-thickness compression response of uncured prepreg during manufacture by automated layup[J]. Proceeding of the Institution of Mechanical Engineering: Part B-Journal of Engineering Manufacture, 2012, 226(2): 193-202.
[9] 肖军, 李勇, 文立伟, 等. 树脂基复合材料自动铺放技术进展[J]. 中国材料进展, 2009, 28(6): 28-32.
[10] 陈亚莉. 飞机用复合材料的低成本制造设备及工艺[J]. 航空制造技术, 2012(19): 44-46.
[11] 包建文. 高效低成本复合材料及其制造技术[M]. 北京: 国防工业出版社, 2012.
[12] LIU Y N, YUAN C X, LIU C X, et al. Study on the resin infusion process based on automated fiber placement fabricated dry fiber preform[J]. Scientific Reports, 2019(9): 7440-7452.
[13] MATVEEV M Y, SCHUBEL P J, LONG A C, et al. Understanding the buckling behaviour of steered tows in automated dry fibre placement (ADFP)[J]. Composites Part A: Applied Science and Manufacturing, 2016, 90: 451-456.
[14] KADIYALA A K, PORTELA A, DEVLIN K, et al. Mechanical evaluation and failure analysis of composite laminates manufactured using automated dry fibre tape placement followed by liquid resin infusion[J]. Composites Science and Technology, 2021, 201: 108512.
[15] AZIZ A R, ALI M A, ZENG X, et al. Transverse permeability of dry fiber preforms manufactured by automated fiber placement[J]. Composites Science and Technology, 2017, 152: 57-67.
[16] Hexcel Reinforcements. Veiled tape with improved resistance to delamination: EP 12725010.8[P]. 2014-04-09.
[17] FRANCESCO M D, VELDENZ L, DELL'ANNO G, et al. Heater power control for multi-material, variable speed automated fibre placement [J]. Composites Part A: Applied Science and Manufacturing, 2017, 101: 408-421.
[18] GHARABEGI N. Composite laminates made by automated fiber placement of dry fibers and vacuum assisted resin transfer molding[D]. Montreal Concordia University, 2018.
[19] KOZACZULK K. Automated fiber placement systems review[J]. Transactions of the Institute of Aviation, 2016, 245(4):52-59.
[20] 段振锦, 潘利剑, 刘卫平, 等. 干纤维铺放真空辅助成型复合材料的性能[J]. 玻璃钢/复合材料, 2016(12): 43-48.
[21] 耿奕, 宁博, 陈吉平, 等. 用于航空复合材料的自动铺丝干纤维层间粘结性能[J]. 复合材料学报, 2022, 39(9): 4441-4458.
[22] 刘姝呈, 李林秀, 潘利剑, 等. 自动铺放工艺参数对干纤维预成型体工艺性能的影响[J]. 复合材料科学与工程, 2022(11): 93-101.
[23] 李晓涵, 李勇, 还大军, 等. 热塑性定型剂对干铺丝-RTM工艺及力学性能影响[J]. 航空动力学报, 2019, 34(4): 864-874.
[24] BELHAJ M, DELEGLISE M, COMSA-CARDONA S, et al. Dry fiber automated placement of carbon fibrous preforms[J]. Composites Part B: Engineering, 2013, 50(7): 107-111.
[25] KADIYALA A K, O'SHAUGHNESSY T, LEE S, et al. Influence of environmental conditioning on mechanical properties of carbon dry fibre preformed thermoplastic matrix composites manufactured via automated placement-resin infusion process[J]. Composites Communications, 2021, 27: 100864.
[26] VELDENZ L, FRANCESCO M D, GIDDINGS P, et al. Material selection for automated dry fiber placement using the analytical hierarchy process[J]. Advanced Manufacturing: Polymer & Composites Science, 2018, 4(4): 83-96.
[27] DELL'ANNO G, PARTRIDGE I, CARTIE D, et al. Automated manufacture of 3D reinforced aerospace composite structures[J]. International Journal of Structural Integrity, 2012, 3(1): 22-40.
[28] GARDINER G. Novel dry tape for liquid molded composites[EB/OL]. (2021-01-19) [2022-12-12]. https://www.compositesworld.com/articles/novel-dry-tape-for-liquid-molded-composites.
[29] MARTIN E S, ABREU H B. 实现飞机主结构成本效益的一种新型复合材料解决方案[J]. 航空制造技术, 2013(15): 56-57.
[30] 闫超, 陈萍. 自动铺丝技术及其在飞机复合材料构件制造中的应用[J]. 玻璃钢/复合材料, 2017(11): 101-105.
[31] 刘亚威. 航空复合材料制造正在经历非热压罐变革[C]//探索创新交流——第六届中国航空学会青年科技文集(上册). 沈阳: 2014: 632-635.
[32] 宁莉, 杨绍昌, 冷悦, 等. 先进复合材料在飞机上的应用及其制造技术发展概述[J]. 复合材料科学与工程, 2020(5): 123-127.
[33] 马志阳, 高丽敏, 徐吉峰. 复合材料在大飞机主承力结构上的应用与发展趋势[J]. 航空制造技术, 2021, 64(11): 24-30.