基于超声的碳纤维复合材料孔隙率表征方法对比研究

玻璃钢/复合材料 ›› 2018, Vol. 0 ›› Issue (7): 42-48.

基于超声的碳纤维复合材料孔隙率表征方法对比研究

陆铭慧, 张雪松^*, 郑善朴, 江淑玲

南昌航空大学无损检测技术教育部重点实验室,南昌 330063

收稿日期:2018-01-31 出版日期:2018-07-25 发布日期:2018-07-20
通讯作者: 张雪松(1992-),女,硕士,主要从事超声检测方面的研究,734971458@qq.com。
作者简介:陆铭慧(1963-),女,博士,教授,主要从事超声检测方面的研究。
基金资助:
国防科工局技术基础科研项目(Z202014T001)

THE COMPARATIVE STUDY OF POROSITY CHARACTERIZATION METHOD OF CARBON FIBER COMPOSITE BY ULTRASOUND

LU Ming-hui, ZHANG Xue-song^*, ZHENG Shan-pu, JIANG Shu-ling

Key Laboratory of Nondestructive Testing, Ministry of Education,Nanchang Hangkong University, Nanchang 330063, China

Received:2018-01-31 Online:2018-07-25 Published:2018-07-20

摘要/Abstract

摘要： 研究了超声法表征复合材料孔隙率的方法,使用频域参量非线性系数进行表征,定义了经典和改进型非线性系数表达式,分析了两种非线性系数的特点,对比讨论了两种非线性系数用于评价孔隙率的灵敏度。通过改变固化压力的方法制备了碳纤维复合材料孔隙率试样,采用金相分析统计了孔隙率,并进行了衰减与非线性系数表征孔隙率的对比研究。结果表明,改进型非线性系数效果最好,经典非线性系数次之,衰减系数效果最差。改进型非线性系数更适合表征孔隙率。

关键词: 碳纤维复合材料, 孔隙率, 经典非线性系数, 改进型非线性系数, 衰减

Abstract: In this paper, we studied the method of characterizing the porosity of composites by ultrasonic method, characterized porosity using the non-linear coefficients of frequency-domain parameters, defined the classical and improved nonlinear coefficient expressions, analyzed the characteristics of the two nonlinear coefficients, and discussed the sensitivity of two kinds of nonlinear coefficients to evaluate the porosity. The porosity of carbon fiber composites was generated by changing the curing pressure. The porosity was measured by metallographic analysis, and the comparison between nonlinear coefficients and attenuation to characterize porosity was carried out. The results show that the improved nonlinear coefficient has the best effect, followed by the classical nonlinear coefficient, and the attenuation coefficient has the worst effect. Improved nonlinear coefficients are more suitable for characterizing porosity.

Key words: carbon fiber composite, porosity, classical nonlinear coefficient, improved nonlinear coefficient,
attenuation

中图分类号:

TB332

陆铭慧, 张雪松, 郑善朴, 江淑玲. 基于超声的碳纤维复合材料孔隙率表征方法对比研究[J]. 玻璃钢/复合材料, 2018, 0(7): 42-48.

LU Ming-hui,ZHANG Xue-song*,ZHENG Shan-pu,JIANG Shu-ling. THE COMPARATIVE STUDY OF POROSITY CHARACTERIZATION METHOD OF CARBON FIBER COMPOSITE BY ULTRASOUND[J]. Fiber Reinforced Plastics/Composites, 2018, 0(7): 42-48.

参考文献

[1] 杨小平, 黄智彬, 张志勇, 等. 实现节能减排的碳纤维复合材料应用进展[J]. 材料导报, 2010, 24(3): 1-5.
[2] 沈军, 谢怀勤. 先进复合材料在航空航天领域的研发与应用[J]. 材料科学与工艺, 2008, 16(5): 737-740.
[3] 刘玲, 路明坤, 张博明, 等. 孔隙率对碳纤维复合材料超声衰减系数和力学性能的影响[J]. 复合材料学报, 2004, 21(5): 116-121.
[4] 徐建勇. 碳纤维复合材料孔隙缺陷超声检测技术研究[D]. 杭州: 浙江大学, 2013.
[5] 毕洲洋, 陈建辉, 王广龙, 等. 黏接界面贴合型缺陷非线性超声检测[J]. 解放军理工大学学报(自然科学版), 2015, 16(1): 62-67.
[6] 王强, 孙丽华. 非线性Lamb波结构早期损伤监测研究[J]. 压电与声光, 2016, 38(1): 170-173.
[7] 陆铭慧, 李沛芮, 王旭. 复合材料孔隙含量超声多参量评价方法研究[J]. 玻璃钢/复合材料, 2016(3): 55-59.
[8] Ogi H, Hirao M, Aoki S. Noncontact monitoring of surface-wave nonlinearity for predicting the remaining life of fatigued steels[J]. Journal of Applied Physics, 2001, 90(1): 438-442.
[9] 赵友选. 含微裂纹结构的超声非线性检测机理与表征[D]. 成都: 西南交通大学, 2015.
[10] 钱祖文. 非线性声学-第2版[M]. 北京: 科学出版社, 2009.
[11] 周晓军, 莫锦秋, 游红武. 碳纤维复合材料分布孔隙率的超声衰减检测方法[J]. 复合材料学报, 1997, 14(3): 107-114.
[12] 张翔, 陈军, 林莉, 等. 复合材料孔隙形貌特征对超声波散射衰减影响的分析[J].中国机械工程, 2010, 21(14): 1735-1741.
[13] 碳纤维增强塑料孔隙含量和纤维体积含量试验方法: GB/T 3365—2008[S].

[14] Yu S S, Zheng H F, Cheng W, et al. Research on the nonlinear ultrasonic testing of CFRP based on abaqus[J]. Applied Mechanics & Materials, 2014(610): 205-208.
[15] Liu P, Sohn H. Damage detection using sideband peak count in spectral correlation domain[J]. Journal of Sound & Vibration, 2017, 411: 20-33.