玻璃钢/复合材料 ›› 2018, Vol. 0 ›› Issue (12): 78-81.

• 应用研究 • 上一篇    下一篇

分瓣金属模辅助缠绕工艺成型舱段缩比件

於永红, 杨静文, 刘兆朋, 李泽英   

  1. 江苏恒神股份有限公司,丹阳212314
  • 收稿日期:2018-03-19 出版日期:2018-12-28 发布日期:2018-12-28
  • 作者简介:於永红(1968-),男,工程师,主要从事复合材料工装模具设计方面的研究,419926487@qq.com。

RESEARCH ON CABIN FORMED BY SPLITTING METAL MOLD ASSISTED WINDING PROCESS

YU Yong-hong, YANG Jing-wen, LIU Zhao-peng, LI Ze-ying   

  1. Jiangsu Hengshen Co., Ltd., Danyang 212314, China
  • Received:2018-03-19 Online:2018-12-28 Published:2018-12-28

摘要: 以某型号复合材料舱段研制为背景,提出用分瓣金属模辅助缠绕工艺整体成型内网格加强筋圆柱壳复合材料构件。依据舱段结构特点,设计了缩比件,并用分瓣金属模成型了碳纤维复合材料缩比件。研究结果表明,分瓣金属模可以成型出外形完整、尺寸准确的缩比件,且成型的构件尺寸稳定性好、精度高,但劳动强度大。试验表明,分瓣金属模辅助缠绕工艺可以整体成型内网格加强筋圆柱壳复合材料构件。

关键词: 分瓣金属模, 整体成型, 缠绕, 复合材料, 舱段

Abstract: In this paper, a splitting metal mold assisted winding process, which could be used for internal grid rib reinforced cylindrical shell composite structure, was developed due to the background of the development of a certain type of composite material cabin. A scaling prototype of carbon fiber composite material was designed and formed by splitting metal mold according to the structural features. The research results show that complete shape and accurate dimension of the scaling cabin can be obtained through the use of splitting metal mold with good dimensional stability and high precision, but high labor intensity. The issues are discussed in the paper. Experiment results show that the internal grid reinforced cylindrical shell composite structure can be integrally formed by the splitting metal mold assisted winding process. Ideas on the future research composite material cabin are proposed in the paper.

Key words: splitting metal mold, integrated forming, winding, composite material, cabin

中图分类号: